What's new
The improvements to the QuiverLog app and this website, per version. Your app shows them once after an update, and under Settings › What's new.
Latest version: QuiverLog 2.15
Version 2.15
- Your sail in one pictureWith Pro, slalom, freerace, race, formula and speed sails show their setup in a drawing of the sail's own outline, traced from the brand's design for 33 models: battens with their number and tension, cambers with their spacers above and below the boom, the cross batten, the boom at its height and the eyelet in use. Tap a camber or batten to set it.
- Batten tensionGive a sail its battens and the usual turns per batten, counted from the top; each session starts from there and logs its own.
Version 2.14
- Merge sessionsA session from SpeedSurf that you also logged yourself becomes one. Your session leads, and it takes only what it doesn't have.
- AI assistants (experimental)With Pro, connect an assistant such as Claude and let it read your quiver and sessions and, if you allow it, log sessions for you.
- Your photos everywherePhotos of your gear and of your settings are on all your devices and on the website, also the ones you already had.
- Foil setupAdd mast, front wing, back wing and fuselage as parts, build a set from the mast with its angles, and log the shims per session in tenths of a degree. A drawing shows the angles and the overall difference.
- Foil when windsurfingOn a board with a Deep Tuttle box or foil box, a windsurf session also offers your foils.
- Tidy your quiver on the websiteMerge gear with its specifications side by side, and delete gear you never used.
- Cambers and outhaul eyeletsA sail gets its cambers with spacers per camber, and its outhaul eyelets; sessions ask only what your sail has.
- SpeedSurf, better connectedConnect by signing in at SpeedSurf instead of pasting a key. Sessions get their spot on the map, foil shims come along, gear shows "Connected with SpeedSurf", and disconnecting always keeps your gear and sessions.
- Clearer session loggingA session now runs in numbered steps in the order you fill them in, with the spot first, and the fin radar shows whenever you pick a fin. Under a nickname you always see which gear it is.
Version 2.13
- Connections: SpeedSurf (experimental)Connect SpeedSurf in the app (Settings › Sync) or on the website and your gear comes into QuiverLog by itself, marked "From SpeedSurf". Unlink an item to keep it as your own. Still experimental: tell us what you run into.
- Made for iPadOn iPad, Home, Equipment and the pages of your gear and sessions use the whole screen, in blocks and columns side by side.
- Sorted by sizeGear is sorted by name and then from small to large.
- Board versionAdd the construction after the model, such as Carbon or Wood, with suggestions per model, also for RRD.
- Booms and fins in detailBooms get head and tube diameter, width and a mast shim you log per session; fins get their box and the Weed and Delta types; boards a Twinser fin setup.
- More sizes for masts and boomsAdd a mast in several lengths, or a boom in several ranges, in one go.
Version 2.12
- Retired gearSold, broken or lost gear gets its own section under Equipment and on the website. With Pro you see what each piece cost against how much you used it.
- Retired on a dayRetired gear can still be picked for sessions up to the day it was retired, and stays in all your sessions. Gear used in a session can't be deleted by accident.
- More sizes at onceAdding a board, sail or fin? Pick the other sizes of the same model and each is saved as its own item.
- Log again your wayLog again leaves out retired gear, and you can switch it off in Settings › Sessions.
- Tidier quiver on the websiteBoards show length, width, volume, type and fin box first, without the footstrap details. Tribal is now in the fin brands.
Version 2.11
- Pro on your accountYour Pro subscription is kept on your QuiverLog account, ready to count on every device you sign in on.
- MDM masts and preferred mastMasts and extensions can be RDM, MDM or SDM, and a sail has a Preferred mast from your quiver. In a session you can still pick an extension of another diameter.
- Sync without iCloudThe logbook syncs through the QuiverLog server only; iCloud just keeps the daily backup file (Pro).
Version 2.10
- Reliable sync between devicesYour iPhone and iPad now keep in step through the QuiverLog server only, so a session's gear is the same everywhere.
- iCloud backup file (Pro)Every day a backup of your whole logbook in your own iCloud Drive; make one any time under Settings › Subscription.
- Log againStart a new session with the gear, settings, wetsuit and spot of your last session, straight from Home, or of any session from its page. The wind is fetched for now.
- Duplicate equipmentMake the next sail or fin of a series in one go: duplicate it and change the size.
- Import from ExcelOn the website, add your whole quiver or an Excel logbook in one go, with templates and examples to fill in.
- Nicknames in sessionsA session shows brand and model with the nickname after it in italics.
- More roomEquipment and Sessions put their title in the bar, and adding sits in each group's header.
Version 2.9
- How was the setup?Rate the setup overall, the sail (1: heavy, off limits · 5: perfectly balanced) and the board (1: no control · 5: goes where I want).
- Fin star diagramIn slalom, freerace and formula sessions rate the fin on control, railing, pointing, speed and gybing, right on a star diagram.
- Better adviceQuiver advice weighs each sail, board and fin by its own rating.
- Setup tips (Pro)Rated something low? See what your best sessions in similar wind did differently, and trim tips to try next time.
Version 2.8
- RaceboardsA new board type with the whole board on the drawing: mast track, daggerboard well, two straps along each rail, the angled straps and the tail straps.
- Mast base over 50 cmOn a raceboard the mast base slides over the whole track, shown on the drawing.
- Daggerboard positionSet how many positions your daggerboard has and how far apart (e.g. -15, 0 and +15 mm), and log it per session.
- Formula and new brandsThe board type Race is now Formula; BOHO and Onehundredboardz are in the board brands.
Version 2.7
- Footstraps on a drawingYour board from above with its footstrap inserts. Tap the strap you used and drag it through the holes; 0 is the base row.
- Your board's insertsSet up single or double screw, the rows front and back (up to 8) and the base row, and drag and turn each strap to match your board.
- Freewave and SpeedNew board and sail types, with the matching footstrap layout.
Version 2.6
- Boom height in cmSlide the boom height freely, in cm from the middle of the cut-out, from −15 to +15 cm. Earlier sessions were converted.
- Boom height range per sailWave sail with a longer cut-out? Set how far the boom goes down and up on the sail.
- Clearer pictures on the websiteMast base and boom height are drawn next to each session's settings, with the middle marked.
Version 2.5
- What's newAfter an update, this screen shows what changed. Find it any time under Settings › What's new.
- Terms of useAgree to the terms once before you start, with the privacy statement one tap away.
Version 2.4
- Privacy settingsSwitch logs to improve QuiverLog on or off under Settings › Privacy, and read the privacy statement and terms of use there.
- Logs deleted after 90 daysServer logs are removed automatically after 90 days.
Version 2.3
- Quiver advice (Pro)Pick your spot, say how the wind blows to the shore and how the water is, and get the board, sail, fin or foil and trim of your best sessions in conditions like today.
- Wind nowThe current wind at your spot from Open-Meteo, or type in your own reading.
- Honest accuracyThe advice tells you when it has fewer than 10 rated sessions in different conditions to go on.
Version 2.2
- Instant syncA change on your iPhone, iPad or the website reaches your other devices right away, also in the background.
- Profile photo everywhereYour profile photo now syncs between your devices and shows on the website.
- Help & FAQAnswers to common questions in the app, searchable and offline, under Settings.
Version 2.1
- Sync for everyoneYour logbook syncs between iPhone, iPad and the QuiverLog website, free.
- New models (Pro)New board and sail models and brands as they come out, without waiting for an app update.
- iPadQuiverLog runs on iPad, in every orientation.
- Light and darkChoose a dark, light or system look under Settings › Appearance.
- Booms and extensionsBooms have a length range, sessions a boom length within it, and only extensions that fit your mast (RDM or SDM) are offered.
- Footstraps from your boardEvery session starts with the footstrap setup of the board you pick.
- Pro for life for beta testersThanks for testing: your account keeps Pro.